Connect with us

Education

​NTU scientists find Electrifying Solution to Sticky Problem

Inspired by the need to overcome the limitations of biomimetic glues in wet environments, scientists from Nanyang Technological University (NTU Singapore) have invented a glue that will harden when a voltage is applied to it. This opens a plethora of commercially promising advances such as:

• Using the adhesive to join metal panels under water, for example, in underwater pipe repairs;
• Replacing sutures when there is a need to join body tissues together during surgery;
• Tailoring the properties of the adhesive to be more gel-like or rubber-like so it would work well in vibrating or damp environments

This innovative research was published recently in Nature Communications, a peer-reviewed scientific journal under the Nature Publishing Group.

The new adhesive, nicknamed “Voltaglue”, opens up a host of possible practical applications, from underwater repair works for ships and pipes, to being a versatile tool for doctors performing surgery.

In future, surgeons could use biocompatible glue patches to join two pieces of body tissue together in one or two minutes, instead of sutures which often require 15 to 20 minutes of careful stitching.

Assistant Professor Terry Steele, the lead scientist for this research project from NTU’s School of Materials Science and Engineering, said it took them over a year to develop an adhesive that could work under wet conditions such as in the human body or underwater.

“Most glues in the market don’t work under wet conditions, much like how sticky tapes won’t work if the surface is wet, since the adhesive will stick to the water instead of the surface,” Asst Prof Steele explained.

Usually adhesives such as superglue harden upon contact with moisture in the air. Others like epoxy, often used in electronic mobile devices, has to be baked in high heat of about 150 degrees Celsius, or made using two different chemicals mixed together. These methods are unsuitable in wet environments.

“We had to find a way to make glue which cures (hardens) when we want it without being affected by the environmental conditions, so electricity was the best approach for us,” Asst Prof Steele added. “The hardness of our glue can be adjusted by the amount of time we apply a voltage to it, which we call electrocuring.”

“For example, if we are gluing metal panels underwater, we want it hard enough to stick for a long time. However, for medical applications, we want the glue to be more rubber-like so it wouldn’t cause any damage to the surrounding soft tissues,” Asst Prof Steele explained.

This unique electrocuring property allows Voltaglue to be customised for different applications.

Voltaglue is developed using hydrogels consisting of carbon molecules called carbenes, grafted onto tree-shaped plastic known as dendrimers.

Upon contact with electricity, the reactive carbenes, which are capable of hooking onto any surface nearby, are released. The amount of “hooks” created depends on how long electricity is applied and how many carbenes are present.

This technology is currently patented through NTUitive, the university’s commercialisation arm.

Strong but reversible

Another distinct feature of the new glue is that it could be made reversible in future, said Asst Prof Steele. He is now furthering research in this area, after winning a competitive research grant of $900,000 awarded by Singapore’s Ministry of Education earlier this month.

As the world becomes more concerned about sustainability, companies are looking to design ‘End-of-Life’ products that can be easily recycled, reused or remanufactured into new parts and components so as to reduce waste and energy consumption.

Glues which can cure and be subsequently un-cured through electricity would be the industry’s “Holy Grail”, as automakers and shipyards will be able to assemble and dissemble parts with ease, minimising the need for fixation by bolts, nuts and screws.

Such reversible glue will also open up new possibilities in the global adhesive market in transportation applications, estimated to be worth over US$3.3 billion in 2016 (Adhesives and Adhesive Applying Equipment, by BCC Research)

Moving forward, Asst Prof Steele and his team of 11 researchers are working to improve their new electrocuring glue so it can harden in just a few seconds, compared to about 30 seconds now; and also working on a way to undo the process.

They will also look for the best way to commercialise the technology through a new start-up or via industry partnerships.

***END***

Note to Editor:
The research findings described in the media release can be found in the scientific journal Nature Communications, under the title, “Adhesive curing through low-voltage activation” by Jianfeng Ping, Feng Gao, Jian Lin Chen, Richard D. Webster & Terry W. J. Steele.

Media contact:

Lester Kok
Manager
Corporate Communications Office
Nanyang Technological University
Email: lesterkok@ntu.edu.sg

About Nanyang Technological University

A research-intensive public university, Nanyang Technological University, Singapore (NTU Singapore) has 33,500 undergraduate and postgraduate students in the colleges of Engineering, Business, Science, Humanities, Arts, & Social Sciences, and its Interdisciplinary Graduate School. It has a new medical school, the Lee Kong Chian School of Medicine, set up jointly with Imperial College London.

NTU is also home to world-class autonomous institutes – the National Institute of Education, S Rajaratnam School of International Studies, Earth Observatory of Singapore, and Singapore Centre on Environmental Life Sciences Engineering – and various leading research centres such as the Nanyang Environment & Water Research Institute (NEWRI), Energy Research Institute @ NTU (ERI@N) and the Institute on Asian Consumer Insight (ACI).

A fast-growing university with an international outlook, NTU is putting its global stamp on Five Peaks of Excellence: Sustainable Earth, Future Healthcare, New Media, New Silk Road, and Innovation Asia.

The University’s main Yunnan Garden campus has been named one of the Top 15 Most Beautiful in the World. NTU also has a campus in Novena, Singapore’s medical district.

For more information, visit www.ntu.edu.sg

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Text Translator

Awards Ceremony

Click on the Image to view the Magazine

GBM Magazine cover


Global Brands Magazine is a leading brands magazine providing opinions and news related to various brands across the world. The company is head quartered in the United Kingdom. A fully autonomous branding magazine, Global Brands Magazine represents an astute source of information from across industries. The magazine provides the reader with up- to date news, reviews, opinions and polls on leading brands across the globe.


Copyright - Global Brands Publications Limited © 2024. Global Brands Publications is not responsible for the content of external sites.

Translate »